Ravel Avani Analogue Addressable Fire Alarm Control Panel
Features:
- User friendly circuit.
- Device/Detector wise configuration facility.
- 2000 Event Storage with Real Time Clock.
- Upto 192 grouping facility.
- Pre Alarm Action.
- All field wiring are power limited and supervised.
- Programmable detector sensitivity.
- Device type verification.
- Earth fault annunciation facility at 0 ohms.
- Double Address Sensing.
- Walk test, Loop wise test, Lamp(LED) test.
- 40 X 4 Characters LCD display.
- Maximum 4 numbers of loop card with Class 'A', Style 5,6 or 7 and Class 'B' Style 4 wiring.
- Maximum 254 devices(any combination) per loop.
- Day/Night Mode facility.
- USB 2.0 Interface for PC connectivity.
- RS485 Communication facility for Network/Repeater.
- Programmable Auto Silence Facility.
- Programmable AC Loops Delay.
- Programmable Silence Inhibit.
- 2 no's of ' of programmable inputs.
- Battery low audio, visual warning.
- Three programmable Form 'C' relay for Fire, Fault and Supervisory.
- 2 no's of ' of Supervise Notification Appliance Circuits.
Related Products
- Touch Keypad for user friendly operation.
- Complies with UL-864 and NFPA-72.
- Epoxy powder coated finish.
- Operates on 110-220v 60/50 Hz, AC Mains power supply.
- 12-128 Class 'B' Style ' B' or Style ' C' initiating device circuit(IDC).
- Maximum current rating:5A for upto 24Zone & 10A for above 24 Zone.
- 2 Nos of Class 'B' Notification Appliance Circuits(NAC).
- NAC shall be programmed as auto silence/Silence Inhibit.
- Standby(battery) backup 24v DC power supply with inbuilt Charger.
- Error free Fire/Fault status in unambiguous colored LED indication.
- 1000 Event storage with RTC.
- Main, Standby status with audible and visual indication.
- Three Programmable Form 'C' relays for fire and fault.
- Resettable/Steady 24V D.C. Output.
- RS485 Communication facility(Optional).
- TCP/IP(Optional) facility.
- One man Walk Test facility for Zone.
- Zone Wise Sounder/Contact via RS485.
- Password Enable/Disable facility for user level.
- All field wiring circuits are Power limited except 110-220v AC and Battery.
- All field wiring circuits are supervised except Relay contact.
- Zone Isolation facility with loop voltage cut off.
- Earth fault annunciation facility at 0 ohms.
- Programmable AC loss delay.
- Programmable Trouble reminder.
- Peer to Peer Networkable maximum 16 Panels.
- Conventional Smoke Detector UL listed.
- Dual LED ' for 360 visibility.
- Advanced detection and communication protocol.
- Easy installation and maintenance.
- Sleek low-profile housing design.
- Regular 100mm base.
- Ravel Indian Manufacturer, International standard.
- Switch Mode Power Supply.
- Modular Construction, Serviceable.
- Surface Mount Technology.
- Battery polarity deep discharge protection.
- As per IS -2189 Standard.
- Standby battery backup with built in charging.
- Fire/Fault status in unambiguous colored LED indication.
- Switch Mode Power Supply.
- Tactile Keypad for easy panel operation.
- System on indication.
- Main, Standby status indication.
- Low Battery visual warning with audible tone.
- Relay output for actuators for Fire and Fault.
- Lamp Test facility.
- Zone wise one man walk Test Facility.
- Zone wise Isolation facility with loop voltage cut off.
- Compatible to all type of Conventional Detectors.
- Optional Zone Wise Sounder/Zone Wise Contact.
- 220V AC Operation.
- Can Switch Light Load upto 1000W.
- Detection Range 12m.
- Detection Angle 110 degrees.
- Sensitivity Control.
- Lux Sensitivity Control.
- Light on Time Control.
- ABS Housing.
Ravel 12 – 128 Zone Fire Alarm Panel
Model:RE – 900Features:
Ravel Photoelectric Smoke Detector
Model:RE 316S – SLFeatures:
Ravel Conventional 2 – Zone Fire Alarm Panel
Model:RE- 102Features:
Motion Sensor / Smart Sensor
STAND ALONE EXTERNAL P.I.R.MOTION DETECTOR with sensitivity, time, lux, retrigger & bypass controls.
Features:
