Ravel Multi Detector
Model:RE 316SH – 2LFeatures:
- Smoke cum Heat Detector.
- UL Approved.
- Dual LED ' for 360 visibility.
- Advanced detection and communication protocol.
- Easy installation and maintenance.
- Sleek low-profile housing design.
Related Products
- User friendly circuit.
- Device/Detector wise configuration facility.
- 2000 Event Storage with Real Time Clock.
- Upto 192 grouping facility.
- Pre Alarm Action.
- All field wiring are power limited and supervised.
- Programmable detector sensitivity.
- Device type verification.
- Earth fault annunciation facility at 0 ohms.
- Double Address Sensing.
- Walk test, Loop wise test, Lamp(LED) test.
- 40 X 4 Characters LCD display.
- Maximum 4 numbers of loop card with Class 'A', Style 5,6 or 7 and Class 'B' Style 4 wiring.
- Maximum 254 devices(any combination) per loop.
- Day/Night Mode facility.
- USB 2.0 Interface for PC connectivity.
- RS485 Communication facility for Network/Repeater.
- Programmable Auto Silence Facility.
- Programmable AC Loops Delay.
- Programmable Silence Inhibit.
- 2 no's of ' of programmable inputs.
- Battery low audio, visual warning.
- Three programmable Form 'C' relay for Fire, Fault and Supervisory.
- 2 no's of ' of Supervise Notification Appliance Circuits.
- UL listed.
- Dual LED ' for 360 visibility.
- Advanced detection and communication protocol.
- Easy installation and maintenance.
- Sleek low-profile housing design.
- Regular 100mm base.
- Address setting by 8 digit DIP switch.
- Micro-controller based.
- 12 zones.
- Multiple zones programmable as delay, immediate, panic or fire.
- Separate key pad included 1 in number.
- Two individual user codes-master and servant.
- Can attach up to five additional remote key pads.
- Touch Keypad for user friendly operation.
- Complies with UL-864 and NFPA-72.
- Epoxy powder coated finish.
- Operates on 110-220v 60/50 Hz, AC Mains power supply.
- 12-128 Class 'B' Style ' B' or Style ' C' initiating device circuit(IDC).
- Maximum current rating:5A for upto 24Zone & 10A for above 24 Zone.
- 2 Nos of Class 'B' Notification Appliance Circuits(NAC).
- NAC shall be programmed as auto silence/Silence Inhibit.
- Standby(battery) backup 24v DC power supply with inbuilt Charger.
- Error free Fire/Fault status in unambiguous colored LED indication.
- 1000 Event storage with RTC.
- Main, Standby status with audible and visual indication.
- Three Programmable Form 'C' relays for fire and fault.
- Resettable/Steady 24V D.C. Output.
- RS485 Communication facility(Optional).
- TCP/IP(Optional) facility.
- One man Walk Test facility for Zone.
- Zone Wise Sounder/Contact via RS485.
- Password Enable/Disable facility for user level.
- All field wiring circuits are Power limited except 110-220v AC and Battery.
- All field wiring circuits are supervised except Relay contact.
- Zone Isolation facility with loop voltage cut off.
- Earth fault annunciation facility at 0 ohms.
- Programmable AC loss delay.
- Programmable Trouble reminder.
- Peer to Peer Networkable maximum 16 Panels.
Ravel Avani Analogue Addressable Fire Alarm Control Panel
Features:
Ravel Analogue Addressable Photoelectric Smoke Detector
Model:RE 317D – SLFeatures:
12 Zone Control Panel
Some alarm systems serve a single purpose of burglary protection, combination systems provide both fire and intrusion protection.Intrusion alarm systems may also be combined with cctv systems to automatically record the activities of intruders, and may interface to access control systems for electrically locked doors.
Premises Control Unit(PCU) or Panel:The “Brain” of the system, reads sensor inputs, tracks arm/disarm status, and signals intrusions. In modern systems, this is typically one or more computer circuit boards inside a metal enclosure, along with a power supply.
Sensors:In devices which detect intrusions, Sensors may placed at a perimeter of the protected area, within it, or both. Sensors can detect intruders by a variety of methods, such as monitoring doors and windows for opening, by monitoring unoccupied interiors for motions, sound, vibration, or other disturbances.
Sensors:In devices which detect intrusions, Sensors may placed at a perimeter of the protected area, within it, or both. Sensors can detect intruders by a variety of methods, such as monitoring doors and windows for opening, by monitoring unoccupied interiors for motions, sound, vibration, or other disturbances.
Features:
Ravel 12 – 128 Zone Fire Alarm Panel
Model:RE – 900Features:
